This is a Live-Edge Maple Slab that we cut to size and installed to be the countertop for a great client in Hyde Park, Boston. The grain has incredible figure that pops when oiled. We took great care…

Elm is gorgeous. This elm slab is even more beautiful in person than it is in photos. Note, this is not the natural color of elm. Elm is a much lighter brown, and there are typically some vert subtle…

This custom built desk which now lives in Brighton, Massachusetts has a walnut live edge top with an oak bowtie in the corner. The filing cabinet has one file drawer and two storage drawers with oak…

It's really nice making a table that you know is going to be used by children who are learning and engaging with nature. This ten foot red oak slab table is going to be home to art projects, gardening…

Ideally you have the length of material to use single lengths of board whenever you're doing a waterfall so that the grain patter can continue over the edge. It's a subtle thing, but when you don't do…

This twelve foot reclaimed oak table started with seven firefighters in the Cannon Hill showroom. 12 feet of reclaimed oak is of course a very large and heavy table, and we had to make the top as flat…

Sturdy and sleek, 60" Diameter, white oak table with a white-wash and lacquer spray finish. The white-wash is a product called "natural" from Rubio Monocoat. It can be topcoat finish, but this client…

Big, bold and beautiful. This kitchen island top which was handmade and installed by Cannon Hill is in a recently remodeled Roslindale home. It is 80 inches by 63 inches by 1 3/4 inch thick,…

This white oak table was for a couple who'd recently gotten married and moved into a new place in Somerville. This is a really classic table design, but it just looks better when Cannon Hill…

The client grew up in the Berkshires and has since moved to North Carolina. This maple slab from Berkshire Products was a rare find, in that it was so wide and also short. The home was built in the…

This table was a lot of fun. It's 60" x 30" with two 16" Extensions that remove completely. We put together a number of whitewashed sprayed samples for the client and she chose her favorites. The grain…

This is a mahogany table with A-frame metal legs and table extender boards in a Jamaica Plain home. Warmly lit spaces with…

This walnut dining table is a Cannon Hill classic. Unlike other companies that will limit you to a few machine made pedestal base options, and then try to stain them to make a "two tone" table, at…

This walnut table found its home in a Back Bay brownstone apartment, recently remodeled by J H Architects. The extender…

This was an incredible build. The bed was completely custom designed with the client after a home visit and multiple phone calls and finally a CAD. There is a full cabinet construction on the inside to…

This table has a cherry top 70 x 44 x 1.5" thick. The farmhouse turned legs are painted black. 

This piece was built to go in a transitional area between the pool and the house, so it will hold wet towels and bathing suits, and has a storage shelf for dry towels or slippers and sandals beneath.…

Typically large commercial remodel or new construction projects go mostly with what's known as "commercial grade" furniture and millwork vendors. This means "you get what you get and you don't get…

We just delivered four of these to a restaurant being built in Revere so they aren't in use yet. More photos to come soon!

The client had these elm slabs shipped across the country from California. They were in rough shape when we got our hands on them but we were able to unleash an incredible inner beauty. Cannon Hill…

This walnut round is in a North End apartment. Even though it is only 32 inches in diameter, it can seat four to a meal if the serving dishes are kept on the kitchen island countertops. Its metal…

We made this custom fit walnut mantlepiece for an alcove in the wall between the fireplace and television to act as a beautiful piece in the home, but also to block some heat from reaching the…

The cast iron base for this island is customized to say 'Medford, Massachusetts' where this reclaimed oak kitchen island lives. The finish color on this island is chestnut brown with just a hint of…

This awesome desk started with a small hand sketch that the client drew of her dream desk, and we made it come to life. It has two pen drawers, cast iron wishbone bases, and Morado accent pieces on the…

Live Edge Oak book match with an oil finish in a newly purchased home in Newton. The slabs are clean, classic and beautiful. Nothing wild here, but really nice grain. A steady, handsome tree. Oil…

This table is a great example of how a mahogany table can complement the darker trims and finishes of classic 19th Century…

This table is dark, but not quite as dark as the photos make it out to look. The stain is called "Ebony" which is a dark, dark brown and the top coat is an oil-based-urethane which gives it a little…

This Reclaimed Oak Oval Table is 80 inches long and 40 inches wide. The bench matches the curved profile. The finish on this table is called "pure" and the legs are custom made trapezoids. We can make …

This approximately 50" wide by 8 foot long walnut book match is two sister slabs that were shipped to us from our distrubutor after a collaborative section process with the client. When the slabs…

This reclaimed oak table has a robust trestle base that allows for more comfortable seating at its corners. Every board on…

This was a really fun collaboration with the client, who had an idea for a glass table top and a walnut base that would extend. They knew what they wanted, and they tried to come up with a system for…

This 34" round walnut table top can seat three comfortably, and can be pulled out from the wall to squeeze four diners if serving platters are kept on the kitchen bar counters. We make tables of all…

Pictures in the client's home coming soon!

The client chose this slab on Berkshire Products website and shipped it directly to Cannon Hill Woodworking. We cut it to the desired size, mimicking…

Claro Walnut desk with bronze plated wishbone legs from our friends at Ares Iron in Rhode Island. 

Now you see it, now you don't! We have a fully removable, easy to install, super strong, rail system that allows our clients to add table extenders to trestle tables or tables with metal legs. The sky…

This reclaimed oak table is attached directly to the kitchen island in this newly renovated Charlestown condominium. The idea behind the design is that the table can remain shorter, so that it doesn't…

In this case the client came to us with a very specific need. He is a small business owner with a home office with a composite conference table that works for his office meetings. However, when he…

The clients are remodeling their own home in Natick. They've taken on the remodel as a passion project and wanted a table that fit perfectly into their new dining space that could seat two extra people…

This walnut table is 70" x 44" wide. It's a wide table, which lends itself to family style dining. The base is custom-made A frame steal with a clear coat protective finish. There is one 14" table…

Yea, so the name of our company is Cannon Hill Woodworking, but that doesn't mean we can't orchestrate another type of table, because our steel work is all done in house and we can contract…

This bar was made of pine floors and douglas fir doors that were pulled from a Somerville home built in the early 1900's during a full gut renovation.

Custom built teak storage bench built for a new construction home with a beautiful oceanside pool and pool house. This bench is made from real European teak which is approximately two to three times…

This is a reclaimed oak table with a cast iron base purchased through a third party vendor. We make custom welded steel bases, but we do not make cast bases. Oil finish on the table top. Has all the…

This beautiful walnut table and leg set was designed by our client. We're not painters (not good ones anyways!) so we sent the legs off to be sprayed with a matte black paint that was to the clients'…